RFID Anti-Metal Tags
On-Metal UHF Patch Tag
- 1–3 m read range when mounted directly on steel or aluminium
- FR4 PCB substrate with ferrite layer eliminates metal detuning
- Pre-applied 3M 9448A adhesive — peel-and-stick installation
- IP65 rated against dust and water jets
On-Metal UHF Patch Tag — Features
Standard RFID labels fail on metal surfaces. Our On-Metal UHF Patch Tag uses a specialist FR4 substrate to isolate the antenna from the metal, delivering consistent read performance.
On-Metal UHF Patch Tag — Customization
On-Metal UHF Patch Tag — Specifications
| Frequency | 860–960 MHz (UHF) |
|---|---|
| Protocol | ISO 18000-6C / EPC Gen2 |
| Chip | Impinj Monza 4QT |
| User Memory | 128 bytes |
| Read Range (on metal) | 1–3 m |
| Dimensions | 95 × 25 × 3.5 mm |
| Substrate | FR4 PCB + ferrite |
| IP Rating | IP65 |
| Operating Temp | -20 °C to +70 °C |
| Adhesive | 3M 9448A |
| Certifications | RoHS, CE, FCC |
| MOQ | 500 pcs |
On-Metal UHF Patch Tag — FAQ
-
The tag performs best on flat surfaces. On surfaces with a radius greater than 150 mm (e.g., large pipes), read range drops by roughly 30%. For tighter curves, contact us about our flexible on-metal variants.